Product Features: :
Remote controller: the remote controller allows you to remotely move Power Pointer frames forward and backward
RF transmission: it uses RF signal to control Power Pointer frame, effective operating rang of the pointer is 100 feet
NOTE: Each pointer uses unique I.D. code, so one pointer will not interfere with other pointers are used concurrently.
USB port, plug and play
Great for speech, teaching, meeting
Powered by 1x AAA battery (NOT included)
Size: 135 x 35 x 15mm (L x W x H)
Setting up the pointer:
1. Insert the receiver into the USB port
2. The pointer is installed automatically and will work after receiver inserted
3. LED light on the receiver starts blinking press up or down button on the remote controller for two seconds until led light becomes steady off. He blink works when push the button
4. Open MS Power Pointer, check the operation by pressing page up/down, power pointer frame should move forward or backward after pressing the button
5. Press long-click of side button, slide start of MS Power Pointer and finish with press again and press-short click of side button, it becomes black screen for conversation time.
---Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure.
---Never look directly into the pointer.
---Never point a laser beam at a person.
---Keep it out of reach of children.
1 x Laser Pointer
1 x Receiver