VILTROX FC-240 3-in-1 2.4GHz Wireless Remote Flash Trigger for Canon EOS Mark II Mark III 1D 5D 7D 50D VFS-99715

Product Features: : FC-240 is using a global free FSK 2.4GHz wireless channels which can be suitable in many countries FC-240 with FSK, can guarantee speed, distance and stability Remote control distance range is about 100M in open area When using the special flashgun of Canon or Nikon, the shutter synchronization speed reaches to 1/200s In order to be convenient to match, you can solely purchase receiver FC-240RX,(FC-240 is composed by transmitter FC-240TX and FC-240RX),so you can control several receivers in the same time by one transmitter More extendable function, you can control different camera to shoot by purchasing shutter control cable You can control all kinds of flashgun and studio light by purchasing studio light control cable. Function: It can be used as wireless remote shutter release Has the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Pressing, Full-way Pressing Press the button of transmitter to control camera. It can be used as wireless Flash trigger 1) Has the function of firing the flash speedlite ---Amount the transmitter into hot shoe of camera, connect the receiver with the flash speedlite, please half-way of shutter button to wake up the flashgun at the same time, the green signal light will be bright for some seconds, and then full press shutter button to fire the flashgun and take a picture. ( This " Wake up " function is only support the flashgun which having the sleep mode ) ---One transmitter can trigger more than 2 receivers at the same time, so you can trigger more than 2 flashes at the same time. You can buy extra receivers depends on your flashgun, and you can also buy the Sync PC cable separately. With C1-C3 shutter release cable, Suitable for: ---- Canon EOS 1Ds Mark II, 1Ds Mark III, 1D Mark iv, 1D Mark II, 1D Mark, 5D Mark II, 5D Mark III, 1D, 5D, 7D, 50D, 40D, 30D, 20, 10D, D60, D30, D2000, 1v HS, 1v, 3 Type: FSK 2.4GHz wireless remote control system Power Supply: ----Transmitter: 2 x AAA Batteries (NOT included) ----Receiver: 2 x AAA Batteries (NOT included) Distance: ≤100M Channel: 4 channels Shutter Release: Half-press, Fully Press The terminal connector of transmitter: PC input terminal connector The terminal connector of receiver: 2.5mm plug The number of transmit: above 20000 times Stand-by time of Receiver: Above 50 hours (Using AAA1.5V×2 lithium battery) Size: ----Transmitter: 79 x 41 x 28 mm / 3.081 x 1.599 x 1.092 inch ----Receiver: 58 x 44 x 32 mm / 2.262 x 1.716 x 1.248 inch Net Weight: 105 g / 3.675 oz Color: Black as shown in the picture Product Specifications:: Package Contents:: 1 x Transmitter 1 x Receiver * 1 x C1-C31 Shutter Release Cable