Net Weight (g): 30_,_
Size (cm): 5.5×5_,_
## Learn More About This Product
How to use:
Step 1. Apply the base coat to the chosen pattern on the stamp.
Step 2. Selected the nail polish you want,then paint the polish onto the face of the stamp ,the more polish you paint,the better the effect will be.
Step 3.Scrape the excess polish on the paper as hard as you can.
Step 4.You can use cotton swab to dip in polish remover to wipe off the excess polish around the pattern.
Step 5.Make your finger nail as fast as you can to stick to the stamp.
Step 6.Make sure to roll the pattern slantways from one side to the other side.
Step 7.Put the top coat on the nail.
#Stamping Image Plates: How-To
Take out the stamp. Use a cotton swab dipped in nail polish remover to clean the stamp head. Dry the stamp off well, otherwise it will not print correctly.
You can apply a base coat to enhance the stamp effect. Apply the coat, then allow to dry.
Take your selected nail polish color and paint the polish onto the face of the stamp, being sure to scrape away any excess polish.
Before the polish dries on the stamp head, press the stamp on to your nail using steady, even force.
Check the stamp to make sure you are satisfied with the imprint.
Apply a clear top coat over the stamp to make it last longer.
* Step Seven:
Use nail polish remover to clean the stamp, scraper, and steel plate.
Tips: The steel plate is shipped with a thin sheet of transparent plastic PP film to protect against scratches. Before using the steel plate for the first time, be sure to removed the protective film.