Image Sensor: 1/3" SONY COLOR CCD/U8 CMOS.
CCD Dimension: 5.59mm(H)4.68(V).
CCD Pixels: 752(H)582(V).
Horizontal Resolution: 540TV Lines.
Minimum Illumination: 0Lux/F1.2 (IR ON).
Scanning Sys. Inertial 2:1.
Features: Pan 360˚ Tilt 90˚, Dual glass.
White Balance: Auto.
Effective Distance at Night: 25m Indoors.
IR LED: ф5: 24pcs.
S/N Ratio: More than 48dB.
Switching: Automatic switching sense according to the clock.
Gain Control: Auto ON/OFF.
Operation Temperature: -10℃~+50℃/ +14˚F~+122˚F.
Supplied Power: DC 12V ± 10% 270mA.
Size: 93 x 66mm / 3.66 x 2.59in.
Base on 1/3" SONY COLOR CCD sensor or U8 CMOS.
Built-in 24 super IR-LEDs.
Waterproof and weather resistant housing for outdoor use.
Excellent night vision.
Economical solution, includes board lens.
High sensitivity, low smear, excellent anti-blooming, and high S/N ratio.
High clear, rich and realistic color, high stability, and widely applicable to indoor, outdoor, day and night, automotive rear view, ect.
Built-in an infrared illuminant to assist for cameras in low illumination environment.
Have small volume, lightweight, high integrative level, easy and convenient fix and use.
Long life luminary with using special wavelength Infrared LED.
Suitable for surveillance of supermarket, mall, shop, resident area, bar and so on.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
The user will be required to correct the interference as his own expense if not install in accordance
Temperature of the work environment shall be between-10℃and 50℃.
Do not open its cover of the pickup camera. Otherwise its function of waterproof will be ineffective.
Please the keeping glass surface clean. Otherwise it may make light sensor an expiration.
Any changes or modifications in construction of this device which aren't expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Recommend to use a regulated DC 12V power supply unit with Camera for best picture and for safe operation of the unit.
Please according to the technique parameter within the scope of rule the electric voltage area, electric current area usage.
Transmission Power: 10mW/CE, 2mW/FCC.
Power Supply: DC 12V.
Consumption Current: 20mA (max.).
Size: 39 x 35 x 33mm / 1.541.381.3in.
Transmit video signal by 2.4GHz frequency band.
With BNC connector plug.
4-channel available to avoid interference.
Built-in microphone for audio monitoring.
Min. 100m transmission distance without block.
Suitable for CCTV camera and other video devices.
The converter, which designed for CCTV camera with BNC plug, can convert the signal from CCTV camera to wireless signal and send to the wireless receiver some where.
With the ultra-small size of 39mm (L) x 35mm (W) x 33mm (H) of main body, the camera could be used for discreet observation. Also it could be used for portable monitoring with battery or battery group.
The product works at ISM-2.4GHz. When it is interfered by other wireless equipment at the same band. You could change the operation channel to avoid interference.
The product achieves at least 100 meter transmission distance without block. According to the essential principle of electromagnetic wave, actual transmission distance may reduce by through the bemires such as wall, floor, and ceiling , etc.
Aspect Ration: 7 inch(16:9).
Display Element: Color TFT LCD.
Video System: NTSC.
Active Area: 154.08(mm) x 86.58(mm).
Receiver Channel: 4CH.
Contrast Ratio: 300:1.
Db Level: -90dB.
Composite Video (AV): One-way AV input.
OSD Language: English.
Input Voltage: DC 12V.
Max Power Consumption: ≤8W.
Size: 190 x 143 mm / 7.48 x 5.63 in.
7 inch TFT LCD 2.4GHz 4 channels wireless AV color monitor.
4 receiver channel, CH1: 2414MHz, CH1: 2432MHz, CH1: 2450MHz, CH1: 2468MHz.
Weight: 3745.00 g
Size: 503520 cm
4 × 1/3 inch Sony Day & Night Color 24 LEDs CCD Cameras
4 × Wired Camera Converters to Wireless Camera
1 × 7 inch TFT LCD 2.4GHz 4-Channels Wireless AV Color Monitor
1 × Remote Contr