The product can be used in the car inside illuminating or in adding to the fun of driving, it can be installed anywhere inside the car or take the place of the original top light in the car.
The product is suitable only for vehicles with DC12V, be cautious not to install it in any cars which are not DC12V.
It is equipped with insurance tube, which can effectively prevent any damage to the car caused by any special suddenness. If you found the tube won't send out light, open the back lid and check the insurance tube first, if the problem is caused by the tube itself, just replace it, otherwise, send it to the factory to repair.
Cut off the power supply of the accumulator before installation, remove the former top light, pull out the original electric line with care while confirming the function of each line.
Referring to the installation picture, pull the original soft line through the central hole of the base board, fix the base board with screw (better use the original top light screw), connect the down-lead of the product and bind it up, stuff the leftover back into the top shed, insert firmly the main body, set the glider and fix it.
Weight: 319.93 g
Size: 22.520*2.5 cm
1 × Circle Car Indoor Lamp