Auto Car HeadLight Taillight Film tint Sticker Modification 10cm*1m

Auto Car HeadLight Taillight Film tint Sticker Modification 10cm*1m

5 (1 product review)Added 4 years ago
US$ 5.39 Free worldwide shipping!
DinoDirect
Headlight Tint Film is a transparent color thick vinyl to give extra protection and individuality to your car. Blue Headlight Tint Film ensures protection from any possible outside damages as well as a professional and customized look. Headlight Tint Film is available in colors of Black,orange, Green, Blue which are very vivid and bright colors to suit your unique need. 10cm1m Auto Car Sticker Fog Light HeadLight Taillight Film Sheet For Car Modification Projector Headlights Tinted Tail Lights Headlight Cover --Color Optional: > : > > Colorful/ Sunproof/ Shine your Car : : > Can be applied easily on all the common car headlights. Flexible design: bends around all cars. Attaches easily with : automotive trim tape. Tape Included: Will not damage paint. Waterproof and sunproof: : Protect your car: : : > Without residual glue on the car after remove COLOR OPTION:Blue,orange,Black, green The film is embossed, resembling true carbon fiber, which reflects lights as expected and change the highlights of the pattern depending on the viewing angle.3D colorful film is not just a cheap imitation vinyl, it is a high quality three-dimensional textured vinyl that reflects light the same way real carbon fiber parts do. It has a self-adhesive back and will stick to pretty much any surface, but also can be removed and re-applied numerous times without losing its adhesion. Clolrful headlight film is also water resistant and UV stable, so applying it to exterior surfaces such as a hood, spoiler, or the whole car is not an issue. > Advantage of colorful film: completely soft, no bubble at all, more adhesive!!! > Instructions > 1 > > Clean the surface on which the sticker is to be installed. Use rubbing alcohol and a clean rag. As soon as you wipe the surface with the rag, use a second dry rag to buff the surface. This will dissolve and remove any wax that may be on the surface. > > 2 > > Spray water on the surface where the sticker is to be applied. This will allow you to prevent larger stickers from being installed misaligned. > > 3 > > Peel the backing off of the sticker you will be installing. Hold it by the edges so that it is bowed downward in the center. > > 4 > > Position the sticker over the place where you intend to install it and lower your hands so that the middle of the sticker touches the wet surface first. Continue lowering your hands until the entire sticker has made contact with the damp surface. This will prevent the middle of the sticker from bunching up and wrinkling. > > 5 > > Apply the squeegee to the exact center of the sticker, and slowly work in circles around the center point to force the water out from under the sticker. If an air pocket forms, work the bubble out of the edge of the sticker before continuing. > > 6 > > Wipe the sticker gently with the dry rag to adhere it to the surface and to clean excess water out of the edges of the sticker. This will ensure that the carbon fiber sticker adheres to the surface without peeling up. > > 1 pc x 10cm 1m headlight film **