1 Channel DC 9V/12V/24V 315MHz/433MHz RF Remote Control Switch - Transmitter & Receiver - 3 Control Modes FSLH0020010

1 Channel DC 9V/12V/24V 315MHz/433MHz RF Remote Control Switch - Transmitter & Receiver - 3 Control Modes FSLH0020010

US$ 18.69 Free worldwide shipping!
DinoDirect
This 1CH DC power rf remote control switch operates in toggle, momentary and latched control mode (set the mode as you like freely). It is great for hard to reach lights or other electrical devices, remote distance can be 100m (theoretically). Widely used for gate remote control, motor remote control, garage door remote control, light remote control, etc. Specification: Receiver: Model No.: S1U-DC09 / S1U-DC12 / S1U-DC24 Channel: 1 CH Control Modes: Toggle, Momentary, Latched Coding Type:Fixed code by Soldering Coding Setting: By learning Power Supply (Operating Voltage): DC12V±1V (S1U-DC12), DC9V±1V (S1U-DC09), DC24V±1V (S1U-DC24) Working Voltage Range of Relay: AC110~240V or DC0~28V PCB size: 68mm x 48mm x 20mm Case size: 75mm x 55mm x 30mm Static Current: ≤6mA Maximum Working Current: 5A / each channel Transmitter: Model No.: C-2 Channel: 2 CH Remote Control Distance: 100m / 300ft (theoretically) Encode: Fixed code by soldering Unit size: 58mm x 39mm x 16mm Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) Feature: Wireless control, easy to install Control Lights, Motors, Fans, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/ several transmitters can control one/ several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. Transmitting Frequency: 315MHz / 433MHz Usage: 1. Toggle: Connect Jumper-2. Press button 1: Turn on the relay (connect B and C, disconnect A and B) Press button 1 again: Turn off the relay (disconnect B and C, connect A and B) 2. Momentary: Connect Jumper-1. Press button 1 and hold: Turn on the relay (connect B and C, disconnect A and B) Release button 1: Turn off the relay (disconnect B and C, connect A and B) 3. Latched: Disconnect Jumper-1 and Jumper-2. Press button 1: Turn on the relay (connect B and C, disconnect A and B) Press button 2: Turn off the relay (disconnect B and C, connect A and B) Package Include: 1 x Receiver: S1U-DC09 / S1U-DC12 / S1U-DC24 ( 1 channel / 3 control modes) 2 x Transmitter: C-2 1 x User manual