KY-R02+C-201-4 2.4G 4CH Digital Wireless DVR Security System.4GHz Receiver & 4 Color CMOS Wireless Cameras Security System KY-2.4GR02 C-201-4

KY-R02+C-201-4 2.4G 4CH Digital Wireless DVR Security System.4GHz Receiver & 4 Color CMOS Wireless Cameras Security System KY-2.4GR02 C-201-4

4 (8 product reviews)Added 5 years ago
US$ 163.69 Free worldwide shipping!
DinoDirect
This Receiver Camera Kit is one of lower cost of wireless home security system. This Receiver Camera Kit is not only support the 2.4G wireless receiver (4channel selectable) and wired A/V out, but also supports Detect and LCD. The Receiver Camera Kit still setup moving detect. The Receiver Camera Kit will take Photo or AVI automatically once there are moving thing within the detect range, and it will memory the picture to the SD card with JPGE or AVI format. This Receiver Camera Kit is suitable for monitoring of warehouse, market, residence, looking after children and elders and so on. Tiny and wireless, this Wireless Receiver Camera Kit offers effective surveillance protection. Not only does it transmit a great color picture in normal light conditions, but at low or no light conditions, it automatically becomes an infrared camera and provides mono audio. And unlike many other infrared cameras, this one is completely wireless! Specifications: This Receiver Camera Kit switches the receiver's channels by remote control This Receiver Camera Kit has 380 TVL of horizontal definition This Receiver Camera Kit is easy for installation This Receiver Camera Kit with 4 channels exchangeble by auto & manual 100m transmission distance without block Audio monitoring with microphone in camera Unlike many other infrared cameras, this Wireless Receiver Camera Kit is completely wireless Camera: Imaging Sensor: 1/3" CMOS CMOS Total Pixels: PAL: 628x582; NTSC: 510x492 Horizontal Resolution: 380 TV lines View Angle: 62 degree Minimum Illumination: 1.5 Lux/ F1.5 Gain Control: Automatic Frequency: ISM 2,400MHz~2,483MHz 4CH Transmission Power: 10mW Modulation Mode: FM Bandwidth: 18MHz Battery Performance: +5V (DC) %, 700mAh Battery Capacity: 500mAh Working Time: 4 hours Unobstructed Effective Range: 100m Consumption Current: 80mAh Operating Humidity: 85% RH Operating Temperature: -10˚C ~ >50˚C / 14˚F ~ 122˚F Storage Temperature: -40˚C ~ -85˚C /-40˚F ~ >185˚F Channel Frequency: CH1=2414; CH2=2432; CH3=2450; CH4=2468 (MHz) 1/3" CMOS wireless camera DC 5V power supply Receiver: Receiving Frequency: ISM2, 400MHz~2,483MHz Intermediate Frequency: 480MHz  Antenna: 50ohm SMA  Receiving Sensitivity: -85dB  Power Supply: +8V Consumption Current: 180mA TV System: PAL/CCIR; NTSC/EIA Operating Temperature: -10˚C ~ +50˚C / +14˚F ~ +122˚F Storage Temperature: -30˚C ~ +85˚C / -22˚F ~ +185˚F Operating Humidity: 85%RH Connection Terminal: AV output jack, earphone output jack, power input jack, AV in jack The frequency range of 2.4GHz wireless audio and video receiver is 2.400GHz-2.483GHz It has four-channel switch (2.414GHz, 2.432GHz, 2.450GHz, and 2.468GHz) improving flexibility and reliability The transmitter and receiver can be used in the same channel, or one to several usage in the same channel (that is, one transmitter sends signals, several receivers receive signals, the receipt is synchronous and accurate, equivalent to wire video distributing machine) or several to several usage (that is, each transmitter takes a channel, slightly adjusting frequency of receiver to select video and audio transmission of another channel, without mutual disturbance) The video signals received are clear, stable and vivid in color, with good sound effect Video transmission in NTSC or PAL AV output terminal of receiver can be connected with equipment with video and audio input, for example: recorder The AV input terminal of receiver can be connected with equipment with video and audio output, for example, VCD, DVD, convenient for installation and commission This unit uses li-ion battery, convenient for tour This unit is manufactured with international new integrated circuit and TFT colorful liquid crystal display technology. It has the following features: low power consumption, stable performance, no x-ray radiation It is suitable for monitor, supervision, investigation, obtaining evidence, installation, commissioning and other professional usages, and can meet high-level professional safety demands It is attractive for powerful function, simple operation, small volume, wireless signal transmission It can be matched with mini type colorful wireless camera for hidden usages. Its signal can penetrate wall and realize synchronization of picture and sound at the site 85%RH operating humidity Bracket for the receiver How to Use Wireless Camera Receivers? A wireless camera receiver receives all video input from your wireless video camera and allows you to view the video from your computer or TV monitor. Before you can use the wireless camera receiver, however, you have to make sure that the wireless camera as well as the receiver itself is properly installed and configured. Instructions: 1. Connect the wireless camera receiver into a USB port in your computer. When the computer recognizes the device, you will be asked to insert the installation disc that comes with the device. Do so and follow the installation instructions on your screen to install the wireless camera receiver device driver. Reboot the computer. 2. Check if the driver was installed correctly. Click "Start" and type "device manager" in the search box. Click "Device Manager" among the list of options that appear. 3. Click the arrow button beside "Sound, video and game controllers" and see if the name of the wireless camera receiver you just installed is included in the list. If it is not included or if the name has a yellow question mark beside it, you will need to uninstall the driver and repeat the driver installation. 4. Run the wireless camera receiver software to start seeing the video inputs in your computer. Package Included: 1 x Receiver 4 x Cameras 4 x Adapters for Cameras 1 x Switch Power for Receiver 1 x Antenna 1 x Audio/Video Cable