Glow-in-the-Dark Silicone Tailcaps for Flashlights 10 Pieces Per Pack

Glow-in-the-Dark Silicone Tailcaps for Flashlights 10 Pieces Per Pack

5 (12 product reviews)Added 5 years ago
US$ 3.99 Free worldwide shipping!
DinoDirect
What are you viewing is Glow-in-the-Dark Silicone Tailcaps for Flashlights 10 Pieces Per Pack. This tail cap for flashlights made of the silicone. 14mm soft silicone tail cap for flashlights. Capable of tail stand on flat surface to use as a candle. The Click-On Lock-Out Flashlight Tail Cap provides a choice of momentary or constant-on light activation without having to rotate the tailcap on your light. Push lightly on the Flashlight Tail Cap for momentary activation, push harder to activate the light into constant-on mode, click again for off. Specifications: 17.5mm soft silicone tail cap for flashlights This Flashlight Tail Cap is good for DIY projects Capable of tail stand on flat surface to use as a candle Tail cap locks out to prevent accidental activation during transport or storage Click for constant-on Click-on lock-out tailcap The Click-On Lock-Out Flashlight Tail Cap provides a choice of momentary or constant-on light activation without having to rotate the tailcap on your light Push lightly on the Flashlight Tail Cap for momentary activation, push harder to activate the light into constant-on mode, click again for off Dimensions: 0.71 in x 0.71 in x 0.39 in Details: Tail cap locks out to prevent accidental activation during transport or storage Push lightly on the Flashlight Tail Cap for momentary activation, push harder to activate the light into constant-on mode, click again for off Easy push button on/off How to Repair a Stinger Flashlight The "Stinger" flashlight by the Streamlight brand has a brighter bulb than a conventional flashlight but is just as susceptible to a contact in the tail cap push button switch getting loose. This renders the flashlight unusable. To repair the switch, disassemble the tail cap and reseat the contact. A few tools common to most households will be needed, as will a special tool designed for use with tail caps Unscrew the tail cap from the back of the Stinger flashlight. Place the tail cap on a table with the open end facing up. Unscrew the ring from the top of the tail cap and place it aside. Insert the switch repair tool into the screw hole inside the cap. Twist the tool counterclockwise Push down on the tool to raise the insulator plate. Grip an edge of the insulator plate with the jaws of a set of needle-nose pliers. Pull the insulator plate out of the tail cap Grip the loose side contact pin that is inside the tail cap with the pliers. Pull the pin out. Reinsert the pin into the side of the insulator plate. Return the insulator plate into the tail cap. Insert the tool into the screw hole in the tail cap. Twist the tool clockwise. Screw the ring back onto the top of the tail cap How to Remove a Spare Bulb in a Tail Cap Mini Maglite Many of the tools in your do-it-yourself arsenal are designed to be used in enclosed spaces. So, you must have a tool in your kit to illuminate small work spaces. A Mini Maglite flashlight is designed to accomplish this task efficiently and easily. Unfortunately, as with all flashlights, even the heavy-duty Mini Maglite will blow a light bulb occasionally. But, the Mini Maglite is always prepared for this with a spare bulb hidden in the rear cap of the light. In order to access the spare Mini Maglite bulb, you need to know the proper method of accessing the bulb so that you can swap it out and get back to the task at hand Unscrew the tail cap from the Mini Maglite flashlight while holding it so that the lens is pointing at a table. Set the body of the flashlight aside, being careful not to dump the batteries from the exposed compartment Flip the tail cap of the flashlight over so that the battery contact spring is facing up. Grasp the spring and gently twist and pull it away from the tail cap. Place the spring onto the table for replacement later Gently grasp the replacement bulb in the tail cap and pull it straight out of the tail cap. Now that the bulb is free, it is ready for installation into the Mini Maglite Package Included: 10 x Tailcaps for Flashlight

Customers Also Bought

Nov 2012by 3immer
Tailcaps светонакопительный. translate
Mar 2012by Just Leo
Small, but efficient. translate
May 2011by Steve
Great Value, Good item!. translate
Jan 2011by Inspector Nash Bridges
A Must Have. With a little imagination, a roll of duct tape, some bailing wire, a pack of zip ties, and some double sided mounting adhesive; there's no telling what you could do. I can't count the number of times I've used my Mini-Maglite, a Swiss Army Knife, a paperclip, and a piece of gum to get me out of a jam.translate
Dec 2010by Jongkook Park
GOOD. Very handy. I would buy again if something happened to this one.translate
Nov 2010by Stephen Guest
FUN. We were very impressed with this product. The price is amazing for the quality of the system. Works great and will make tailgating lots of fun.translate
Nov 2010by K
Great product. translate
Nov 2010by american guy
pretty nice upgrade. seals up good, waterproof. quality feel, feels up to par if maglite made there own clicky tail. i like the lanyard on there. i bought two of these, one had the new lens broke in half, the other was fine and i used it. but i dont know what they are for the facory lens works even with a led. this is much much much better then the nite ize tail cap those have no lanyard, the o ring doesnt seal enough even to use the light in the rain still gets inside.translate
Oct 2010by FABIEN LECOMTE
Thank you. Thank you. Great service and fast.I would be happy to have farther relashionship with your company.translate
Oct 2010by Malanie Shashika
Don't hesitate to buy!. These Silicone Tail Caps are soooo pretty. And a great value. Don't hesitate to buy!translate
see more reviews...