Thanks for viisting! You are viewing a 3-LED Illumination USB Flexible Lamp Light.Soft lighting, low power consumption, long perfomance life, the USB Flexible Lamp Light is a good choice for you. Take your laptop anywhere and bring bright LED light with you with this astounding USB Lamp Light. USB Powered 3 LED Light for Laptop or PC. This handy little gadget provides subtle lighting when you need it. The Flexible USB Light is an ideal tool when working with a laptop in the car, train, plane, bed or anywhere you need subtle lighting without disturbing others around you.What are you waiting for?
Flex 3 LEDs USB notebook laptop PC reading light black
Standard USB plug compatible with any notebook or dekstop PC that has a USB input
The USB Flexible Lamp Light features energy efficient LED so helps conserve valuable battery power
Flexible gooseneck so that you can angle the USB Lamp Light as you wish
On/OFF switch is on the back of computer mouse shaped light cap
3 Bright LEDs giving excellent white light
No external power source needed
Lightweight but durable construction so it can be carried anywhere
The USB Flexible Lamp Light is small enough to fit in your laptop bag
Overall Length: Approx. 40cm / 15.75in
Soft lighting, low power consumption, long perfomance life, the USB Flexible Lamp Light is a good choice for you
The Flexible USB Light features energy efficient LED so helps conserve valuable battery power
Support any USB ports of PCs & notebooks
Powered by any USB ports
Size in Detail:
Homemade USB LED Light:
A USB cable carries an electrical charge as well as a computer signal when it is plugged into a USB port on a desktop computer or laptop. You can make your own USB "flashlight" by adding a light-emitting diode or LED to an end of a USB cable. A few supplies from a hobby shop or electronics supply store will be needed, as well as a few tools commonly found around the house -- no special electronic skills required
Cut off one end of a USB cable with the scissors. Cut a 2-inch slit in the outer insulation from the cut end of the USB cable with the blade of the utility knife.
Pull the wires out from within the outer insulation. Cut off all of the wires with the wire cutters except for the red and black wires.
Place the USB cable on a work surface with the cut end facing you. Strip 1/2 inch of insulation off the ends of the red and black wires with the wire strippers.
Cut two 1-inch lengths of heat shrink tubing with the scissors. Place a heat shrink tube over each of the two wires.
Place the longer of the two conductive pins on the bottom of the white LED into the open end of the heat shrink tube that is covering the red wire. Repeat this with the other pin on the white LED and the other heat shrink tube.
Turn the heat gun on and aim it at the heat shrink tubes. Apply the stream from the heat gun until each of the tubes shrink. Remove the heat gun. Wrap a strip of electrician's tape around each of the heat shrink tubes to insulate the wires and pins from each other.
Wrap electrician's tape around the cut end of the USB cable to secure the LED to the USB cable.
* 1 x Flexible 3 LED USB Light