1. This booster is suitable for consumer use.
2. Before use, you MUST register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Although AT&T;, Sprint, T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use this device, you MUST still register. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
3. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
4. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
5. You MUST shut down if causing interference.
6. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Mobile repeaters are special gadgets that can amplify the signals needed to operate your mobile phone without dropping calls or the network. They work great for filling in coverage when signals are week or in a low coverage area. Places such as underground parking lots, basements and so on can all benefit from such a useful gadget. They are highly reliable and practical as well as lower the radiation levels of your phone; with the simple install of this product, what more could you want.
- Color: Gold
- Material: Metal
- Power supply: AC 110~220V
- Frequency range:
- Uplink: 890-915MHz/1920-1980MHz
- Downlink: 935-960MHz/2110-2170MHz
- Power: -70 ~ -40dBm / FA (1.23MHz)
- Max. output power: 17dBm (uplink) / 20dBm (downlink)
- Gain: 60dB (uplink), 65dB (downlink)
- Impedance: 50 ohm
- Transmission delay: 1us
- Suitable for indoor use
- Coverage area: 1000m2
- Provides the ultimate solution in any area where cellular communications can not
work well due to leak of signals
- Easy installation and operation
- Accessories includes:
- 1 x 100~240V power adapter (length: 1 meter)
- 1 x Power cable (2-flat-pin plug)
- 1 x English manual
Dimensions: 7.48 in x 6.93 in x 0.83 in (19.0 cm x 17.6 cm x 2.1 cm)
Weight: 36.12 oz (1024 g)