Do you want to cultivate the independence of your child? Or do you want to keep doing housework while taking care of your baby? If so, we would like to introduce this 7" LCD Wireless CMOS Camera Baby Monitor to you. This baby monitor is widely used for 0 to 10 years old children. With this baby monitor, you can give your baby their own enough space! This baby monitor is compactly designed and portable. There is camera and receiver within this monitor. The camera can be put on desk or clip to other places. With the 7"TFT LCD, you can see every action of your baby. There is an inner microphone in the camera, you can hear the voice of your baby. Infrared LED has 5m nigh vision range. By using this baby monitor, you can easily take care of your babies all the time. You will never be cautious and anxious for your children with this item! Get one right now! You will never regret!
## Product Description
1、2.4GHz Wireless 7.0” LCD monitor with remote control
2、380TV lines clear picture display
3、Built-in IR lights for night vision range
4、Weather-proof design for outdoor usage
5、4-channel available to avoid interference
6、Built-in microphone for audio monitoring
7、Min. 100m transmission distance without blocks
8、Channel scan and channel skip for multi-camera usage.
1、Open the packaging box, take out the receiver, adjust the support post behind the receiver to a proper position, and put the receiver unit stably. Then install the antenna correctly.
2、Power the machine unit: Connect the input terminal of the receiver power adapter to AC 110~220V, other terminal to DC IN socket of the receiver. Slip the power switch to ON position, then the red power LED lights, the receiver starts up.
3、Power on the camera: connect the camera power adapter with camera, and put it on the correct position. Note: metal shield will loss the signal.
4、Channel selection: press the channel selection key, and the LED display will show the number from 1 to 4, the number means the relevant channel. As select the correct frequency channel, the screen will display the relative signal from the camera, also can adjust the frequency channel by the remote control.
5、Cycle frequency initialization: press the channel selection key for 3 seconds, the LED will display the number from 1 to 4 in rurn, and every number will keep 5 seconds, it is fit for more cameras working in the same time. Also can initialize the function by the remote control.
6、Receive more clear video: Trying to adjust antenna direction can get more clear video.
7、Adjust voice volume and video brightness on the relative side knob.
8、Video and audio output: Connect the A/V cable to show the video and audio
9、Video and audio input: press the channel selection key for a while will turn off the wireless receiving function and the LED only displays a red dot, at this condition, can connect the A/V cable with A/V source for monitor using.
9、Earphone hole belong the side of the receiver is used for external earphone.
Basic specification for 7" TFT LCD
ISM 2.400MHz ~ 2.485MHz
Camera Omni; Receiver; Directional
Min. 100m transmission distance without blocks
Vided output level
Audio Output level
-10℃ ~ +50℃ / +14 ~ +122F
-20℃ ~ +60℃ / -4 ~ +140F
Technical specification for wireless camera
1/3” OmniVision CMOS
PAL: 628×582 NTSC: 510×492
PAL/CCIR: 50Hz NTSC/EIA: 60Hz
Angular Field of View
Adapt to MPU and phase locked loop to control frequency exactly, which possesses high stability.
Ideo & Audio
Open transmission Distance
1x Mini wireless cameras
1x Camera power adapters
1 x 7.0” LCD Monitor
1 x Monitor Adapter
1 x A/V line
1 x Remote
1 x Manual