Hantek DSO5102B 7inch 2-Channel Digital Storage Oscilloscope

Hantek DSO5102B 7inch 2-Channel Digital Storage Oscilloscope

5 (2 product reviews)Added 3 years ago
US$ 408.88 Free worldwide shipping!
Banggood
Description : _Professional Hantek DSO5102B 7inch 2-Channel Digital Storage Oscilloscope_ Features: 200 / 100 / 60MHz bandwidths 1GSa/s Real Time sample rate Large (7.0-inch) color display,WVGA(800x480) Record length up to 1M Trigger mode : edge / pulse width / line selectable video / slop / overtime etc. USB host and device connectivity, standard Multiple automatic measurements Four math functions, including FFTs standard Provides software for PC real-time analysis Specification : : Model DSO5202B DSO5102B DSO5062B Bandwidth: 200MHz 100MHz 60MHz Real-time Sample Rate: 1GSa/s Equivalent Sample Rate: 25GSa/s Record Length(Sample Points): Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional) SEC/DIV Range: 4nS/div-40S/div (in a 2, 4, 8 sequence) Delay Time Accuracy: 500ps : Vertical A/D Converter: 8-bit resolution, each channel sampled simultaneously VOLTS/DIV Range: 2mV/div~5V/div at input BNC Position Range: ±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div) Bandwidth Limit: 20MHz Rise Time at BNC: ≤1.7ns ≤3.5ns ≤5.8ns DC Gain Accuracy: ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div : Trigger Trigger Sensitivity: (Edge Trigger Type) DC : CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT(Typical) 200mV from DC to 40MHz EXT/5(Typical) 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity Trigger Level Range: CH1, CH2 : ±8 divisions from center of screen EXT : ±1.2V EXT/5 : ±6V Trigger Level Accuracy,: typical (Accuracy is for signals having rise and fall times ≥20ns) CH1, CH2 : ±(0.3div×V/div) (within ±4 divisions from center of screen) EXT : ±(6% of setting + 40mV) EXT/5 : ±(6% of setting + 200mV) Holdoff Range: 100ns-10s : Trigger Type Edge: Trigger on the rising or falling edge Pulse Width: Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s Video: Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) Slope: Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s Overtime: from the rising or falling edge Set Time: 20-10s Alternate: Internal trigger on edge, pulse width, video or slope : Measurement Cursors: Manual : The difference between voltage cursors V, the difference between time cursors T, 1/T calculated by Hz. Tracing : The voltage and time at a waveform point Automatic: Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width : Display Type: Right angle 7 inch TFT 16-digit color LCD Resolution: 800 x 480 dots Contrast: 16 gears, with the progress bar to show adjustment Interface: USB host and USB slave : Power Supply Voltage: 100-120VACRMS(±10%), 45Hz to 440Hz,CAT II 120-240VACRMS(±10%), 45Hz to 66Hz,CAT II Power: <30W Fuse: 2A, T rating, 250V : Mechanical Size: Length : 313mm, Width : 108mm, Height : 142mm Package includes : 1 x Professional Original Hantek DSO5102B 2-Channel Digital Oscilloscope (Full accessories as picture shows) Comes in color retail box. Details pictures :