_Mastech MS8910 Auto Scan SMD RC Resistance Tester Capacitance Meter_
Brand Name : MASTECH
Model Number : MS8910
ALL MASTECH ARE ORGINAL FACTORY QUALITY : )
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor and diode. Moreover, the Tester also have the continuity checking function.
Automatically identified the passive Component as has been indicated above. Therefore, the measurement are allowed by fully automatic detection.
Designed to meet IEC1010-1 standard and Stipulation of 2-Poulation Grade.
It conform to the European Unions following Requirement : CE regulation 89/336 (EMC Electromagnetic Compatibility)
The entire outer surface of the Tester case has been with thermo plastic elastomer, and the two testing pins has been gold-plated, so that it is reduce pin contact resistance and prevent to get rusty.
3000 counts LCD display
Full automatic measurement
Auto scanning the Resistance/Capacitance/Diode
Function selection by one FUNC Push Button
Data Hold function
Continuity Checking function
Over Load Indication ( OL)
Low Battery Indication
Auto Power OFF. If the Tester is idle for more than 10 minutes, the tester will automatically turn off the power .
Operating temperature & Humidity : 0 - 40℃(32 ~104℉) & < 80% RH
Storage temperature & Humidity : -10 - 50℃ (14 ~ 122 ℉) & <70%RH
Safety Class : IEC61010-1, 50V CAT III
Power Supply : 3V Lithium Battery CR2032 (included)
EMC : According to CE regulation 89/336.
Dimension (L x W x H) & Weight : 170 x 31 x 17mm, Approx. 48.6 g
±(1.0% of rdg + 2 digits)
±(1.2% of rdg + 3 digits)
: Range (F)
±(2.5% of rdg + 3 digits)
±(3.0% of rdg + 3 digits)
The buzzer will sound if the resistance is less than 30 ohms
: Diode Check
Testing current : 2mA
Open Circuit voltage : 2.8 V
Package included :
1 x MASTECH MS8910 SMD Tester
2 x Free replace test pins
1 x Unit of CR2032 Battery
1 x English user manual
Details pictures :