Item NO.: C4002
Resolution: 640 480
Usage: For MJX F29/F39/F45/F46/T40/T41/F629/F639/T640C/F645
How to install the videography device
Insert te TF memory card into the videography module.
Fix the videography module onto the bottom of the helicopter by screws
Open the helicopter nose and indert the plug of the videography module into the video control socket, and then, reinstall the helicopter nose.
Videography and Photography Function
Turn the switch botton on videography module to the direction of the videography icon, and then turn on the camera switch of the remote control, it will start taking videography and then light of module keeps flashing. Press the camera button again, videography taking will stop.
Turn the switch button on videography module to the direction of the photography ivon, and then press the camera button on the remote control to take photo. Each press takes one photo only.
After shooting is finished, take out the TF memory card from the videography module and insert it into the card reader, then, insert the card reader into USB interface o the computer to watch the video and photo.
To stop shooting, please press the shooting switch on the remote controller. Directly unplug the battery cable or take out the TF memory card from the videography module will result in loss of the video data.
To avoid helicopter crash, please do not insert or take out te TF memory card from the videography module, when the circuit is on. TF memory card should be installed before circuit is on and take out after shooting switch is turned off.
When crash occurs, turn off the helicopter and then turn on the power to recover normal working.
1 x C4002 Camera
1 x USB Reader
1 x 1GB TF Card
1 x Screw Driver
3 x Screw