Car LED Parking System Sensor Reverse Backup Kit Radar Sound Alert
The Car Parking Sensor System can help you avoid those costly backup collisions that happen so easily. What's more important, it can help save the life of a little kid. Once installed, the system will automatically turns on when you put your car into reversing. If an object is detected while backing up, the system emits audible beeps and shows the distance on the on-dash display telling you how far you are from an object. The faster the beep, the closer you are. If you are too close to an object, the beep sounds like an alarm.
Easy installation into any car, truck, or SUV
Digital Colored LED Display
4 Sensor system for enhanced coverage and detection
Anti-freeze and rain proof design to work well under extreme weather
Advance chipset for optimal detection and distance calculation
Rate voltage: 12V
Operation voltage range: 9-16v
Rated current: 20-200mA
Detecting distance: 0-2.5m
Ultrasonic Frequency: 40Khz
Working temperature: -30~+70℃
Display working temperature: -20~+60℃
How it work:
The system starts when you put the vehicle in Reverse Gear, working a little bit a radar system whereby each sensor sends out a signal which bounces against any objects and then back to the sensor head
Closer the object is to the vehicle, less time it takes the signal to bounce, thus allowing the Main Control Box to calculate the distance, display in the form of a digital display and by a beep-beep sound.
As the vehicle gets closer to the object, the interval between beeps becomes shorter until at 0. 3m, a continuous tone is given to indicate to stop.
The car parking sensor will fit any make of car or vehicle, van, caravan, trailer and horse boxes. So that is a parking sensor for any vehicle - your vehicle, anywhere in the world operational in all conditions.
1 X LED Display Monitor: 1 X Main Control Box 1 X Power Cable
1 X 22.5mm Drill: 4 X Parking Sensor 1 X User Manual