_2.0mm 0.75m Desoldering Braid Solder Remover Wick Cable Wire_
Note: _The packaging claim it is : 1.5m, but actually it is 0.75m. Please notice this._
Condition : New!
Type : CP-2015
Length : 0.75M
Width : 2.0mm
How to use :
1.Place the desoldering wick over the solder to be removed,then puh the heated soldering iron tip onto the desoldering wick.The solder will be absorbed.
2.Remove the desoldering wick after the solder has been absorbed.
3.Cut off the used section of the wick using nippers.
4.Repeat steps 1,2 and 3 if the solder is not removed completely.
Absorbability may differ depending on the type of solder.Sn63% and 60% (tin content) have good absortbability.
Package Included :
1 x 2.0mm 0.75m Desoldering Wick CP-2015