Name: swimming pool water tester
Color:as show in picture
Chlorine test - adjust the point:
-Before first use, please adjust the tester to test the pool water or spring water in the following order:
-Traditional liquid testing tools for testing swimming pool water or spring water;
-Record chlorine readings to spare (1.5PPM);
-do not need to be adjusted on the PH.
Find the point of regulation of the tester:
1.the battery compartment in the handle into a AA 1.5 V battery (positive upward).
2.a hand held tester, the other holding the test stick.
3.clean metal rods into the water to the black position.
4.with a metal rod to gently stir the water.
5.metal rods to keep in the water table to the front of the knob until the move can not be raised to the CL direction. And then slowly transferred back to the right until the pointer refers to the traditional
The location of the results measured by the liquid test tools (such as 1.5).
6.Place the test stick is removed from the water, pay attention not to move the knob. The pointer will slide to the right, in a letter between A and E to stop. This letter is to adjust the point.
Note: chlorine before each test, you must first table adjusted to adjust the point ".
The recommendations of the swimming pool water or spa water chlorine content of 7.2 to 7.8
1.test rods remain in the water, the knob to the pH direction raised the issue beeps (read the pH value must remove the battery).
2.Wait until the pointer stops swinging after the pH reading.
3.gently dry the test stick, store it inserted into the slot next to the tester.
The company is consistent with the high-quality, high efficiency, new technologies, new management "for the purpose. Innovation and development, quality first, customer first "business philosophy to provide customers with creative and innovative kinds of products. Our emphasis on team innovation, every step of the process of development are teamwork, and create the outcome of the phase of cooperation and computer use.
Test the chlorine content:
The recommended chlorine content of swimming pool water or spa water is 1.2 to 1.7ppm
1.adjust the pointer raised the point position.
2.with one hand holding the tester, the other holding the test stick, the metal rod into the water to the black position. Wait until the pointer stops swinging after the readings.
3.test rods remain in the water, the pH of the test to continue according to the instructions.
1.Swimming pool, sauna and spa indispensable tool
2.Ideal tool for simple measurement of water pH and C12 value
3. Chemical composition, and no then guess to measure
4. Chlorine concentration levels of security within the measuring range :1.2-1 .7 ppm
5.Security measures within the scope of the level of PH value :7.2-7.8
6. Battery: 1 AA batteries
To extend the pool tester PC-101 service life and ensure accurate measurement,
1, when not in use, set the knob adjusted to the closed position (raised to the PH direction can no longer move so far).
2, put in a cool, dry place away from direct sunlight.
Do not test bars immersed in other fluids other than swimming pool water and spa water.
4, regularly check the battery charge adequacy - the tester uses one "AA" 1.5 V alkaline batteries.
1 x Pool quality tester PH value chlorine tester